CARIDDI LED Ceiling adjustable

Monochromatic LED projector.‎ Floor, wall, ceiling, eaves installation.‎Consists of an adjustable lighting unit and terminal board.‎ Rotation on the base +/-180°, body tilting +/-130.‎ Positioning is maintained by means of locking dowels.‎The base and the lighting unit are connected by a H05RN-F cable.‎EN AB47100 aluminium head and terminal board, EN AW6060 aluminium body, silicone gaskets.‎Electronic ballast integrated in the body.‎ Silicone-sealed silk-screened tempered glass.‎ Wiring to be performed inside the terminal board by piercing an IP65 grommet suitable for 8-12mm diameter cables.‎LED COB with PMMA lens and anodized aluminium reflector in 2 different beam versions.‎Available in 3 different powers.‎All the screws used outside the product are in AISI 316 stainless steel.‎All the components in die-cast aluminium are painted with 3-stage outdoor treatment: nanotechnologies, anti-oxidizing primer, polyester paint.‎Technical features of the light fixtures in compliance with EN60598-1 and section 2-5.‎ IP Rating IP65 Insulation class I.‎ Monochromatic LED projector.‎ Floor, wall, ceiling, eaves installation.‎Consists of an adjustable lighting unit and terminal board.‎ Rotation on the base +/-180°, body tilting +/-130.‎ Positioning is maintained by means of locking dowels.‎The base and the lighting unit are connected by a H05RN-F cable.‎EN AB47100 aluminium head and terminal board, EN AW6060 aluminium body, silicone gaskets.‎Electronic ballast integrated in the body.‎ Silicone-sealed silk-screened tempered glass.‎ Wiring to be performed inside the terminal board by piercing an IP65 grommet suitable for 8-12mm diameter cables.‎LED COB with PMMA lens and anodized aluminium reflector in 2 different beam versions.‎Available in 3 different powers.‎All the screws used outside the product are in AISI 316 stainless steel.‎All the components in die-cast aluminium are painted with 3-stage outdoor treatment: nanotechnologies, anti-oxidizing primer, polyester paint.‎Technica